AnsweredAssumed Answered

Error while creating pair through HORCM

Question asked by Altaf Basheer on Feb 25, 2016
Latest reply on Mar 1, 2016 by Dang Luong
Branched to a new discussion

Hello All,

 

 

I am back with another issue with HORCM configuration file :-)

I assuming that it cannot be an issue with the command device as the pairdiplay command works.

 

I am in the process creating a new pair configuration and while doing so, I keep getting the below error message:

 

=== ===

[root@SHRMPVL01 etc]# paircreate -IH30 -g TEST_APP_HUR -vl -f async -jp 1 -js 1

paircreate: [EX_CMDRJE] An order to the control/command device was rejected

Refer to the command log(/HORCM/log30/horcc_SHRMPVL01.log) for details.

It was rejected due to SKEY=0x05, ASC=0x20, ASCQ=0x00, SSB=0xD004,0xE889 on Serial#(#####)

=== ===

 

COMMAND ERROR  : EUserId for HORC[30] : root (0)  Thu Feb 25 22:42:38 2016

CMDLINE : pairdisplay -IH30 TEST_APP_HUR -fcx

22:42:38-c6e2f-00016884- [pairdisplay][exit(254)]

[EX_REQARG] Required Arg list

[Cause ]:An option or arguments of an option are not sufficient.

[Action]:Please designate the correct option using the -h option.

COMMAND ERROR  : EUserId for HORC[30] : root (0)  Thu Feb 25 22:43:12 2016

CMDLINE : pairdisplay -IH30 TEST1_APP_HUR -fcx

22:43:12-407df-00016886- [pairdisplay][exit(254)]

[EX_REQARG] Required Arg list

[Cause ]:An option or arguments of an option are not sufficient.

[Action]:Please designate the correct option using the -h option.

COMMAND ERROR  : EUserId for HORC[30] : root (0)  Thu Feb 25 22:44:41 2016

CMDLINE : paircreate -IH30 -g TEST_APP_HUR -vl -f async -jp 1 -js 1

22:44:42-c706d-00016892- ERROR:cm_sndrcv[rc < 0 from HORCM]

22:44:42-c75ec-00016892- [paircreate] L_CMD(CREATEPAIR) ERROR :rc = -35

22:44:42-c78fd-00016892- [paircreate][exit(221)]

[EX_CMDRJE] An order to the control/command device was rejected

[Cause ]: An order to the command(control) device failed,or was rejected.

[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM_LOG=/HORCM/log30/curlog) and Remote HORCM logs,and send them to service personnel.

(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.

(2) Check if the RCP and LCP are installed in the RAID.

(3) Check if the path between the RAID CUs is established by using the SVP.

(4) Check if the pair target volume is an appropriate status.

 

 

Can someone please check and help to understand what has gone wrong? Thanks in advance.

 

Regards,

Altaf

Outcomes