HCS Device Manager CLI Plugin

Document created by Kota Saito on Jun 9, 2016Last modified by Kota Saito on Aug 23, 2016
Version 5Show Document
  • View in full screen mode


Overview

 

This is common service template to execute HDvM CLI.

You can execute any HDvM CLI by specifying parameters (e.g. command name, arguments).

This includes HDvM CLI plug-in, so you can use only plug-in inside other service templates.

 

 

Download

 

VersionFileDescriptionTemplate IDVendor IDHAD versionCreated date
01.00.00Download hereInitial implementationhdvmCLIhdsV8.2.0-01Jul 5, 2016

 

 

How to use

 

As standalone service template

  1. Import the service template, then create service from it.
  2. Edit "Device Manager Settings" section in service edit screen because some information regarding Device Manager (e.g. host name, CLI installation path, protocol, port, username, password) are needed to execute HDvM CLI.
  3. Submit service request with new command name (e.g. AddHost) and parameters (e.g. hostname=NewHost, wwnlist=10.00.00.00.C9.4A.5C.16, ostype=Windows). Please see Device Manager manual about what kind of parameters you can specify.

capture_009_13072015_145307.pngcapture_002_07082015_110248.png

 

As one step of other service template

  1. Create new service template or edit existing service template in Service Builder.
  2. Pick the "HDvM CLI' service template from Services tab, or you can also pick only "HDvM CLI Plug-in". If you pick plug-in, there is no GUI settings, so you need to add it.

 

capture_003_07082015_111346.pngcapture_004_07082015_111433.png


Detail Information

 

Internal Configuration

  1. As mentioned above, this service template consists of only one plug-in (HDvM CLI plug-in). The custom plug-in calls HDvM CLI based on specified parameters.

capture_005_07082015_111805.png

 

How to extend

 

No information.

Attachments

Outcomes